Priv Commands in Passport 8600

[GUFDK]

Hi

I am doing a case at nortel and I now have the priv password for my passport

now I wonter if ther is eny one that know's som priv commands

the ones I know for now is:

spyReport - display proceses runing and the % it use of the cpu

hwDumpAll - display all kind of hw counders and hw logs

plz help me and other in finding this commands ( it is nice to know ;-) )

 

[anthonyanderberg]

Disclaimer: may of the protections against typos and other mistakes do not exist in the priv or shell prompts so its generally a bad idea to poke around there too much. Also note that the passwords Nortel gave you will not work for more than a few weeks (they are generated based on the current system date and the chassis serial number.) Also make sure you use the 'logout' command instead of the 'exit' command.

There is a hwClearAll command that clears the counters shown by hwDumpAll. You can also telnet to the controllers in each slot (127.0.1.x where x is the slot number) and view fabric errors, but I don't recall those commands.