Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PrintMig.exe

Status
Not open for further replies.
19972003

19972003

MIS
Feb 16, 2007
205
US
What is the best solution to get the exact copy of the printers from Server A to Server B in Citrix environment? Will PrintMig.exe help or I just need to install the print device one at a time?

TIA
 
Sort by date Sort by votes
If you have one of the latest flavours of Citrix then there is an automatic Printer Driver copy/Install over multiple servers. Managment Console if I remember correctly, in printers funnily enough.

[blue] A perspective from the other side!![/blue]

Cheers
Scott
 
Upvote 0 Downvote
19972003,
ascotta is correct.
Citrix provides a very easy way to copy print drivers across multiple Citrix servers.

Just launch the Citrix Management Console and go down to the Printer Management folder.

From here you can view a specific server (source server for print driver) and then push out the print drivers to other Citrix servers.

Pretty straight forward and saves a lot of time.
Hope that helps.
 
Upvote 0 Downvote
Thank you for the information, I will give a try; on the side note, after I get the printer migrated, will be better to update the drivers to the latest driver?

Thank You,
 
Upvote 0 Downvote
when the driver is driver is replicated over to the destination server, will I still have to install the print devices or the printer is going to show up in the printer and Fax window?

TIA
 
Upvote 0 Downvote
Imported network printers will replicate accross the farm. Drivers will replicate across the farm, client printers on the other hand are a different kettle of fish.

[blue] A perspective from the other side!![/blue]

Cheers
Scott
 
Upvote 0 Downvote
thank you, what will be the best practice of the print drivers? get the latest one from the vendor or just copy it from the other server? I was able to get the driver over to the new server, but when I try to browse the driver during the installation of the actual printer, I can't located the driver does the replication take long? 20 minutes or a few hours?

Thank You,
 
Upvote 0 Downvote
What I wopuld be doing is :-

Pick a server and install all the latest drivers on to it.

Then in the Management COnsole replicate the drivers to all the other servers.
Sometimes It takes a bit of time 20 mins, but make sure you refresh the Management Console, even log off and log back on again, it can take a bit of time.

[blue] A perspective from the other side!![/blue]

Cheers
Scott
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top