unclegeoff
Technical User
I have been told it is possible to print the system config of a compact and modular32, has anyone done this and if so how?
Ta!
Ta!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Printing system programming 1
- Thread starter unclegeoff
- Start date
- Status
-
1
- #3
It's not well explained but works quite well. Here's the rub. You will need NRU and a Fast Rad. Don't do this with a RAD it's too slow. Open the excel work books folder in the NRU program group, open the work book of the system you want to download, then SAVE IT UNDER A DIFFERENT NAME.
Close. Open the saved version, follow the set up to change the work book to match your system size and configuration. Then on the top button bar drop down the ICS option and choose connect. It will connect and load through your usual NRU set up. Try not to down load the whole KSU programming if you are in a hurry. Process works in reverse too.
Cheers
PhM
Close. Open the saved version, follow the set up to change the work book to match your system size and configuration. Then on the top button bar drop down the ICS option and choose connect. It will connect and load through your usual NRU set up. Try not to down load the whole KSU programming if you are in a hurry. Process works in reverse too.
Cheers
PhM
- Thread starter
- #4
unclegeoff
Technical User
Thanks PhM. I kinda thought it would need a Fast Rad. Unfortunately here in the UK getting Rads to work is a whole different ball game.
- Status
