Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
printing output with laser printer
- Thread starter mjhus
- Start date
What are you sending to the printer ?
How do you have the laser printer configured ?
I assume it is attached to LPT1 if you are using lprint
(or perhaps com1).
Generally you will need to set the printer to Raw.
If it has the option for dos capture then enable that and try it.
If you are sending escape sequenses or dumping qb4.x or above code, is the code saved in Quick-mode ? If so, save it
as ascii text then redump it.
How do you have the laser printer configured ?
I assume it is attached to LPT1 if you are using lprint
(or perhaps com1).
Generally you will need to set the printer to Raw.
If it has the option for dos capture then enable that and try it.
If you are sending escape sequenses or dumping qb4.x or above code, is the code saved in Quick-mode ? If so, save it
as ascii text then redump it.
- Status
Similar threads
- Question