Printing BMP files on Laser printers

[subra]

Can anybody tell me how to print BMP files on a laser of deskjet printer through clipper. (Clipper 5.2e) i am using the DOS OS.

thanks

subra if you find this useful let me know at vksubra@usa.net

 

[arainfor]

Nosotros utilizamos PageScript de AbeeLabs.
Sale de miedo!!!.


Saludos

 

[circes9]

Don't know if you've got this handled yet or not.
1. There are some libraries available for Clipper that will print graphics. The one I am most familiar with is out of business.
2. If your BMP could be converted to a PCL, then Clipper coupd print it to a Laser printer simply by copying it to the lpt port.

Hope this helps

Circes9

 

[Guest_imported]

i speak very bad english.. but..


generate file prn in windows..!

Step 1 ... Open image in winword (yes!.. winword for )..
step 2.... select printer (hp) in winword
step 3..... print page in word,check PRINT TO FILE
step 4..... select name xxxxx

this generate xxxxx.prn

test in DOS

type xxxx.prn>LPT1


coding in clipper before body report

! type xxxx.prn>prn
? "name xxx bla bla"
? "bla bla"

ok?

ggsistemas@zdnetmail.com

 

[BlueCorsa]

I.L.A., Inc. was the plubisher of ProHP-6, a library of laser functions for clipper.

I don't know if they are still around, but in their manual is the following support numbers and contact info.

ProHp Technical Support:
Hours of operation 10am - 5pm EST

Fax. (407) 774-6750 (24 hours)
Tel. (407) 774-7734
CIS [70712,3072] checked twice daily.

I.L.A., Inc.
1180 Spring Center South Blvd. Suite 211
Altamonte Springs, FL 32714


Hope this helps..
Bluecorsa
Merlinlctx@aol.com