Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Printing 11x17 on a 5si 1
- Thread starter mjoplin
- Start date
-
1
- #2
Hello,
Make sure Pagemaker is closed.
Check the computer or the network for the ppd for this printer. Once you find it make a copy of it.
Now on the computer search for RSRC.
It is a folder in Pagemaker.
Open the RSRC folder.
Open the usenglsh folder.
Open the PPD4 folder.
Now paste a copy of the ppd into this folder.
Now go back to the usenglsh folder.
Look for the pm65ppd.cnf.
Right click and delete this cnf file.
Close everything and restart Pagemaker.
Now you should be able to see the correct page size when you print because you now have the ppd for Pagemaker to use.
Good luck.
Make sure Pagemaker is closed.
Check the computer or the network for the ppd for this printer. Once you find it make a copy of it.
Now on the computer search for RSRC.
It is a folder in Pagemaker.
Open the RSRC folder.
Open the usenglsh folder.
Open the PPD4 folder.
Now paste a copy of the ppd into this folder.
Now go back to the usenglsh folder.
Look for the pm65ppd.cnf.
Right click and delete this cnf file.
Close everything and restart Pagemaker.
Now you should be able to see the correct page size when you print because you now have the ppd for Pagemaker to use.
Good luck.
- Status
Similar threads
- Locked
- Question