Printer settins

[SBTBILL]

A customer got an HP P401N Laser Jet. It looks like this printer has different settings. Checked the report form Top and bottom margin are set to 0. I figure the printer is set with top and bottom margins. Anybody know how to change this.

 

[Dan Freeman]

Not sure what you're asking.

All laser printers have a non-printable border of about a quarter inch on each side, including top and bottom.

It isn't clear from your post what isn't working.

 

[SBTBILL]

A report that printed properly on a different lazer is now off by 1/2 inch at the top and a 1/2 inch on the left.

 

[DSummZZZ]

If you don't have any environment information in your report form (expr, tag, tag2 fields), chance are it's going to be a printer driver difference. You'll probably have to twiddle with the driver itself from your computer's devices/printers and see if you can change it there. Otherwise, you'll have to change the report.


-Dave Summers-

Even more Fox stuff at:

http://www.davesummers.net/foxprolinks.htm

 

[Dan Freeman]

That could just be a limitation of the printer. Check the documentation.

Foxpro can't print where the printer won't let it.