I am running a windows nt workstation as the only user. I have an Hp540 printer installed, I am trying to install an HP430 plotter and an HP1220cse printer (large format color). I have one parallel port (currently used by 540) and two USB ports (available). Since I am a single user and don't need to print on different devices at the same time and would like to keep one USB port available for a digital camera down load port later. What would be my options for hooking up all these printers/plotters so I can use them with out switching cables or using a switch box??? I have lots of open slots and a few cards in my junk box?? I am an engineer (mechanical) and familiar with adding boards etc., I just don't know what to add?? and how to configure??
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Printer/plotter installations
- Thread starter bjdes
- Start date
- Status
Similar threads
- Locked
- Question
- Locked
- Question