Printer Issue

[zaineyma]

We have a xenapp setup here and we are adding in network printers directly onto a windows 2008 server, the printers are the type where on the network when you send a print job you need to enter in a code number, you then (at anytime) can walk over to the printer, and enter in that specific code to obtain your printout. These are Canon printers. Now, the printers are only allowing local installation which works fine, we download a citrix receiver client to a pc, click on word (for example) it opens, the printer shows on the list, we print a document but it just prints straight through rather than asking for a security code, is there anyway within Citrix Xennapp or directly onto the server where we can get it so that it asks for a code?
Any ideas will be great as this is vital to our launch, many thanks in advance.

 

[balage0]

hello,

did you ask your printer provider about network printing? I think there should be somewhere a code in the printer settings\user profile which sent to the printer for authorization. This should change to get it from user environment variable i think, then use those printers as network printer via print server.

when user login the printer attached, and the required codes changed from user env... i hope

regs
Balazs



I assume responsibility for everythin'