If the private side LAN of a remote site using the cisco vpn 3002 hardware client is using a certain address scheme, say 192.168.15.0, how can the central network, say 192.168.1.0 ping or print to specific addresses in the remote 192.168.15.0?
Is there any NAT possible between the 3002 and the 3005? In between the 3002 and 3005 is a Sprint DSL modem/router, which is supplying the DHCP address to the 3002.
Does this make sense?
Joe
Is there any NAT possible between the 3002 and the 3005? In between the 3002 and 3005 is a Sprint DSL modem/router, which is supplying the DHCP address to the 3002.
Does this make sense?
Joe