It seems as though my print server (Windows Server 2003) does not have appropriate access to the domain. I am unable to log onto it through terminal services, however, I can log on at the console with a Domain User ID. But when I try to map to a share, I am unable to. I also keep getting messages in my logs: Event ID 1030, Windows cannot query for the list of Group Policy objects. Check the event log for possible messages previously logged by the policy engine that describes the reason for this. and Event ID 1058. I looked up the event codes on MS Knowledge but it isn't helping. I have another member server that does not have the same problem. When I try to type in \\domainname\sysvol\domainname on this server, I get Access is Denied. There must be some type of rights/permission issue. This was not a problem when I first built this server several months ago. This has happened over the last month. Please help.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Print Server - Access to Domain
- Thread starter Kayla6
- Start date
- Thread starter
- #2
Some additional information. In the even log when I try to connect in through terminal services, I get the message:
Login rejected for domain_name\user_name. Unable to obtain Terminal Server User Configuration. Access is Denied.
When I try to map a drive to the domain controller. I get:
System Error 5 Has Occurred
Access is Denied.
Thank you!
Login rejected for domain_name\user_name. Unable to obtain Terminal Server User Configuration. Access is Denied.
When I try to map a drive to the domain controller. I get:
System Error 5 Has Occurred
Access is Denied.
Thank you!
- Status
Similar threads
- Locked
- Question