Print Picbox troubles, please Help

[TyGwyn]

Still having trouble with my picboxes, I have got two picboxes on a form and I have generated a barcode which I load into picbox1, I then rotate it through 90deg and put the result in picbox2, I have set autodraw to true and refreshed the pic box but when I print the form with frm.print it thinks the second picbox is empty, I know that if I load an image it prints ok but because I have moved the image in by pixel by pixel, I have trouble. I have tried to save the picbox to a file so that I can reload it, but again I save an empty image although my barcode is definately being displayed in the picbox on the screen.
Any help appreciated

Adam

 

[TheVampire]

Try setting the .Picture property of your picturebox to the .Image property before you save or print.

Example:

Set Picture1.Picture = Picture1.Image


RT

 

[TyGwyn]

Thanks, Have got round the problem, saved the pixels to an image file and reloaded the file before I do a form print.
Not pretty but works ok.

Thanks again.

Adam

 

[TheVampire]

You might try the way I suggested. Quicker and a lot less work for the program and hard drive.