Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

print on plastic stock

Status
Not open for further replies.
tlotzer

tlotzer

Technical User
Aug 4, 2008
1
US
I have to try to print on plastic stock on our Xerox 7000. I have output an ECi202V.tif chart in several ways, read the chart with ProfileMaker, built an ICC profile and plugged it in. I still get the wrong color. I calibrated the stock and saved/applied it to CustomStock1.

Can you point me to the correct procedures?

Here is a screenshot of where I am applying the ICC profile.
 
Status
Not open for further replies.

Similar threads

T
  • Locked
  • Question
Paper jam on HP 4050N
Replies
1
Views
267
DrB0b
DrB0b
R
  • Locked
  • Question
2 users in the same office using 2 different printers both have"GET /eSCL/ScannerStatus HTTP/1.1 Host: localhost:" printed on the top of every paper t
Replies
1
Views
462
DrB0b
DrB0b
sysmatics
  • Question
Initialize a printer after printing a page
Replies
2
Views
849
sysmatics
sysmatics
tom_noods
  • Locked
  • Question
HP PageWide 577 - Large missing sections on prints
Replies
2
Views
462
tom_noods
tom_noods
vgulielmus
  • Locked
  • Question
Shared printer connected via USB
Replies
4
Views
1K
vgulielmus
vgulielmus

Part and Inventory Search

Sponsor

Back
Top