Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Print disabled units only 2

Status
Not open for further replies.

amar0315

IS-IT--Management
Sep 5, 2013
26
US
Is this a possibility?
 
Do a search on "Print Disabled" and you'll find previous discussions on this topic.

Found this in one of them:

LD 32
LDIS 4 0

This will list disabled units on superloop 4, shelf 0. Repeat for all of your superloops / shelves to get all of them.

Good Luck!
 
If you are after disabled digital sets, then go into LD 117 and key in INV GEN SETS or INV GEN ALL for Cards and Digital Sets.

The process can take a while, so I would log back in 1/2 hour later and go back into LD 117 and key in INV PRT SETS or INV PRT ALL etc.

Any active sets will show the serial number and other details whereas unplugged sets will not be available.


All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

If it's working, then leave it alone!.
 
Thanks...both of yall...much appreciated...both answers we very helpful
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top