Print Disabled TN's

[dosev]

I need to print a list of disabled tn's. i am trying to do this in ld 32 but not getting the results i need.

is anyone familiar with this?

thanks

 

[phonz1]

LD 32 LDIS loop/shelf

 

[RyanEOD]

Either I don't have anything disabled or this isn't working for me. Hummmm . . have an example ?

 

[johnpoole]

for digital sets a lot of us use ld 117

inv generate sets

or better inv generate midnight

with the 1st prompt the switch tells in when it's complete then you can inv prt sets, that idc's all digital sets, you will see the missing as well as the sets that the as built does not match the actual..



john poole
bellsouth business
columbia,sc

 

[NortelGuy1979]

LD 32
LDIS 4 0

This will list disabled units on superloop 4, shelf 0. Repeat for all of your superloops / shelves to get all of them.
~MH~

Matt H. - Field Svc Engineer

 

[johnpoole]

on a larger switch i use a script that does an ldis x x.. for an opt 11 i want to say you can do a ldis 0 for cab 0 then ldis 1 etc..

john poole
bellsouth business
columbia,sc

 

[dosev]

hello,

thanks for your reply.


can you provide a little more info? i am still quite new to this whole thing and your reply did not give me the results that i need - i got nothing other than NPR002.

anything you can suggest?

a.

 

[RyanEOD]

ok I see what happened . . here I will step it out for you . .give me a min . .

 

[RyanEOD]

****
>
OVL000
>ld 117
OAM000

MEM AVAIL: (U/P): 2886460 USED U P: 151100 75399 TOT: 3112959
DISK RECS AVAIL: 1152
SURVIVABILITY AVAIL: 0 USED: 0 TOT: 0
=> inv generate sets
Generate set inventory
Started successfully

=>
ERR4291 9 0 1 1

ERR4291 9 0 1 1

MAT011 Inventory sets generation complete



=> inv prt sets
Set inventory:
11 1 2008 12 52 29, 11 1 2008 12 55 50, 70
2616, 02 00, M2616 NT2K16XD 35 01 353CC6 , BETSI , 6780
2616, 02 01, M2616 NT2K16XE 35 01 6ACACB , RONNIE, 6781
2616, 02 02, M2616 NT9K16AC 35 02 7C318A , ROGER , 6782
2616, 02 03, M2616 NT9K16AC 35 04 A0867D , KEITH , 6783
3904, 02 04, M3904 NTMN03EA 70 01 D382C0 , MIKE , 6784
2616, 02 05, M2616 NT9K16AC 35 04 A0F314 , DAVE , 6785
2616, 02 06, <Unavailable>, BILL , 6786
2616, 02 07, M2616 NT9K16AC 35 04 FDFF83 , DANI , 6787
2616, 02 08, <Unavailable>, PORT1 , 7000
2616, 02 09, <Unavailable>, PORT2 , 7001
2616, 02 10, <Unavailable>, PORT3 , 7002
2616, 02 11, <Unavailable>, PORT4 , 7003
2616, 02 12, <Unavailable>, PORT5 , 7004
2616, 02 13, <Unavailable>, PORT6 , 7005
2616, 02 14, <Unavailable>, PORT7 , 7006
2616, 02 15, <Unavailable>, PORT8 , 7007
2616, 08 00, M2008 NT2K08GA 35 01 4B4CF4 , LBTST1, 7040
2616, 08 01, <Unavailable>, LBTST2, 7041
2616, 08 02, M2616 NT9K16AC 35 04 A0E5D7 , CHRIS , 6792
2616, 08 03, <Unavailable>, GTEST , 7067
2616, 08 06, M2616 NT9K16AC 35 04 A0FE84 , LEEANN, 6788
2008, 08 07, <Unavailable>, RONOFF, 6781
2616, 08 08, <Unavailable>, MIKETS, 7062
2616, 08 09, <Unavailable>, TEST2 , 7063
2616, 08 10, <Unavailable>, TEST3 , 7064
2616, 08 11, <Unavailable>, AGENT , 7068
2616, 08 12, M2616 NT9K16AC 35 04 A101CA , LEEANN, 6788
2616, 08 13, M2616 NT9K16AC 35 02 7C20FF , TERRY , 6793
2616, 08 14, <Unavailable>, CONF , 7066
2616, 08 15, M2616 NT9K16AC 35 04 A03D97 , KEITHL, 6791
2008, 09 00, M2008 NT9K08AA 35 03 94D7C9 , RONOFF, 6781
2616, 09 01, M2616 NT9K16AC 35 03 8F274A , ANDY , 6798
2008, 09 02, M2008 NT9K08AA 35 04 CBD213 , JAY , 6779
2616, 09 03, M2616 NT9K16AC 35 04 A0E5D6 , RYAN , 6778
2616, 09 04, M2008 NT9K08AC 35 04 C11691 , PAT , 6777
2008, 09 05, M2008 NT2K08XC 35 01 C16D44 , NEAL , 6776
2616, 09 08, <Unavailable>, PORT1 , 7000
2616, 09 09, <Unavailable>, PORT2 , 7001
2616, 09 10, <Unavailable>, PORT3 , 7002
2616, 09 11, <Unavailable>, PORT4 , 7003
2616, 09 12, <Unavailable>, PORT5 , 7004
2616, 09 13, <Unavailable>, PORT6 , 7005
2616, 09 14, <Unavailable>, PORT7 , 7006
2616, 09 15, M2616 NT9K16AC 35 04 A08A86 , GTEST , 7104
i2004, 61 00, <Unavailable>, DAVEIP, 6785
i2004, 61 01, i2004 Ph2 NTDU92AA 2 2 C2DFF3 , MIKEIP, 6784
KEM1, 61 01, i24 0 000000
KEM2, 61 01, i24 0 000000
i2004, 61 02, <Unavailable>, KEITIP, 6783
i2004, 61 03, i2004 Ph2 NTDU92AA 2 2 524153 , ANDYIP, 6798
KEM1, 61 03, i24 0 000000
KEM2, 61 03, i24 0 000000
i2004, 61 04, <Unavailable>, DOIP , 6787
i2004, 61 05, i2004 Ph2 NTDU92AA 66 2 74F113 , RKTEST, 5000
KEM1, 61 05, i24 NTEX00DA 0 000000
KEM2, 61 05, i24 NTEX00DA 1 000000
i2004, 61 06, i2004 Ph2 NTDU92AA 2 2 8EBC6A , BILLIP, 6786
KEM1, 61 06, i24 0 000000
KEM2, 61 06, i24 0 000000
i2004, 61 07, <Unavailable>, RYANIP, 6778
i2004, 61 08, <Unavailable>, ROGER , 6782
i2050, 61 09, <Unavailable>, RP2050, 6782
i2050, 61 10, <Unavailable>, TD2050, 6793
i2004, 61 11, <Unavailable>, KLIP , 6791
i2004, 61 12, <Unavailable>, PATIP , 6777
i2004, 61 13, <Unavailable>, CHRIIP, 6792
i2004, 61 14, i2004 Ph2 NTDU92AA 2 2 891985 , BLF1 , 5605
KEM1, 61 14, i24 0 000000
KEM2, 61 14, i24 0 000000
i2004, 61 15, <Unavailable>, TERIP , 6793

=>

 

[RyanEOD]

***
OVL000
>ld 32
NPR000
.ldis 0 <-Listing all in Superloop 0. SMALL SWITCH HERE

. <- Return means nothing disabled.

 

[acewarlock]

What switch do you have?




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[dabble]

Another option can be done in LD 30

On an Option 11 system:
LD 30
>TEST

The output will show any TN's / sets that it couldn't ping and this command also disables the TN.

The output would look like this:


>LD 30
NWS000
.TEST

NWS401 3 : -7 -12

NWS501 4 : -13

NWS401 6 : -0 -1 -2 -3 -4 -5 -6 -7 -8

NWS401 9 : -3 -5 -11 -12

.

So TN 3-7 and 3-12 have are programmed but there is currently no sets attached.



On a larger system, like an 81C the command is
LD 30
> LOOP ALL

and the result will be the same.

 

[comtechau]

As previous posts indicated.. To list disabled units per loop in LD 32, -> LDIS <loop> <shelf>

If you want to get a list of all those Loops....
LD 97,
REQ: PRT
TYPE: SUPL

http://commtechau.bravehost.com

 

[johnpoole]

well i guess a dozen answers to a simple question means that there is a lot of ways to do the same thing.. every answer is right.. i run a short script, here's a partial copy of it.. it has to be modified per switch..

proc main

CAPTURE ON
 
    waitfor "."  forever
transmit "LDIS 4 0^M"
    waitfor "."  forever
transmit "LDIS 4 1^M"
    waitfor "."  forever
transmit "LDIS 8 0^M"
    waitfor "."  forever
transmit "LDIS 8 1^M"
    waitfor "."  forever
transmit "LDIS 20 0^M"
    waitfor "."  forever
transmit "LDIS 20 1^M"
    waitfor "."  forever
transmit "LDIS 24 0^M"

capture off

endproc

i didn't include all my ipe's but the general idea is simple.. and i'm to lazy to type.. the other scprit i use for almost the same thing

proc main
   transmit "****^M"
   waitfor ">"
   transmit "ld 117^M"
   waitfor "=> "
   capture on
   transmit "inv prt sets^M"
   waitfor "=> " forever
   capture off
endproc

pull that dot cap up in excel.. use a macro to sort, delete and compare...

john poole
bellsouth business
columbia,sc