Print 5 tab binder index from Word

[ccf143]

Hi all...I'm trying to use Word 2010 to print 5-up divider tabs for 3 ring binders. Currently, we print the tabs on regular paper, then go to a copier and copy them to the tab dividers. Seems like a waste of time to me but I can't figure out how to set it up in Word so I can print from HP 5100 printer. The text prints but is always below the tab...

Any suggestions would be appreciated...thanks.

 

[SkipVought]

Hi,

What is the format on the sheet that you are printing?

Usually these thing are to be printed in peel-off label sheets.

 

[ccf143]

Thanks for the response. I'm afraid that the peel-off label sheets is the answer I'm going to get...

I'm not sure I know what you mean by format...they are 5 tab dividers and I've tried formatting the Word document with the text positioned for each tab and changing the paper size in Page Layout to 9x11. I thought maybe the increased half inch in paper size might do the trick...

Thanks for your input.

 

[SkipVought]

Are you not using a pre-designed template? You could even construct your own template to your sprcifications. Then tweet the design to accommodate you particular tab design.

 

[ccf143]

I'll give it a go...thanks for your time.

 

[SkipVought]

Regarding format, I just pulled up an Avery label template, in Word, that has 18 rows 2 columns (Avery 1109 BIG TAB inserts for Dividers 5-Tab)