We had the 221 set as default prime. We set up the autoattendant and removed the 221 set. Our system is set to have the programming move with the set due to the amount of shuffling we've been doing. We need to get the Zero-to-attendant back, but the 221 set is missing. How can I set another ext to prime without it ringing at every call? I only want it to ring whan Zero is hit. Any ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Prime set
- Thread starter Alfaguy
- Start date
jerryreeve
Vendor
you have three areas you can set the attendent at:
1. Feature 9 8 3 ->aa->attendent:
2. Feature 9 8 2 Attendent
3. Feature * * 2 6 6 3 4 4 ->System programming->direct dial->internal
these all control slightly different ways that people get to your attendent the first is for people in the auto attendent, the second is for someone who is in voicemail and the third is for a regular phone dialing 0 JerryReeve
Communications Systems Int'l
com-sys.com
1. Feature 9 8 3 ->aa->attendent:
2. Feature 9 8 2 Attendent
3. Feature * * 2 6 6 3 4 4 ->System programming->direct dial->internal
these all control slightly different ways that people get to your attendent the first is for people in the auto attendent, the second is for someone who is in voicemail and the third is for a regular phone dialing 0 JerryReeve
Communications Systems Int'l
com-sys.com
- Status
Similar threads
- Locked
- Question