PRI with 100DCD Card 3

[phonemom]

I'm looking for info on programming the 100DCD card. I'll be using it with a TelePacific Flex PRI. They will be using the first 12 Channels for Voice and the 24th as the D Channel. I've put the 12 trunks into a pool and have the PRI portion programmed, just don't know what to do with the CSU/DSU. TelePacific will be installing an Adtran on site.
Thanks -

 

[merlinman]

My response would be, just leave it alone.

The ADTRAN should easily handle the CSU/DSU function.

Concerns would be what type of CO the TelePacafic Flex PRI will emulate.

Perhaps they can enlighten you on that issue.

http://home.comcast.net/~merlinman

 

[phonemom]

Thank you. I had to set all special table values to 0. Worked great by disabling the CSU.

 

[merlinman]

Thanx for the STAR, it's good to be right once in a while.

http://home.comcast.net/~merlinman

 

[comdata]

I would say that you are right just shy of "all the time".