Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PRI wire color pin out

Status
Not open for further replies.

lvNortel

Vendor
Dec 8, 2012
298
US
checked faq but could mot find the colors for a PRI cable for a MICS 7.0. I know one end is a standatd network pinout but i forgot how yo pin the othend

"A phone is a phone and not a computer workstation".
 
Cox build the cable like this:

SIDE-A
CLIP SIDE UP
W/ORANGE
ORANGE
W/GREEN
BLUE
W/BLUE
GREEN
W/BROWN
BROWN

SIDE-B
CLIP SIDE UP
W/GREEN
GREEN
W/ORANGE
BLUE
W/BLUE
ORANGE
W/BROWN
BROWN


Yellow light on the top of the DTI card stays on and the set says NO AVAILABLE LINES

"A phone is a phone and not a computer workstation".
 
Thank you. So then it is not a CROSS OVER cable? Is this STRAIGHT THROUGH, can I use a standard network cable? Is it like this?

SIDE-A
CLIP SIDE UP
1-W/ORANGE
2-ORANGE
3-W/GREEN
4-BLUE
5-W/BLUE
6-GREEN
7-W/BROWN
8-BROWN

SIDE-B
CLIP SIDE UP
1-W/ORANGE
2-ORANGE
3-W/GREEN
4-BLUE
5-W/BLUE
6-GREEN
7-W/BROWN
8-BROWN


"A phone is a phone and not a computer workstation".
 
Ok so this is just a regular network patch cable configuration from the Telco PRI to the MICS DTI card. I thought that a PRI cable was configured differently from what I understand.

"A phone is a phone and not a computer workstation".
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top