PRI trouble 2

[ken1713]

I have two legends tied together with a PRI. Everything works fine except making outside calls from the remote site over the trunks in the hub. I have the default ars tables taking the pri pool and added the digit 9. I checked all ars restrictions but keep getting a waveoff. I can see the lite on the ds1 when I call out but no go. I'm sure I have something programed wrong but can't figure it out. Any help would be appreciated.

 

[Pepperz]

Remote Access > Tie Line Restrictions

Pepperz at newper dot net

 

[ken1713]

Pepperz, Thanks for the input, tried what you said still getting waveoff. I would appreciate any other suggestions. I'll keep looking at the programing I know I have something wrong.

 

[TouchToneTommy]

Are the trunks set to reliable disconnect? Can you transfer calls across the network?

 

[ken1713]

TTT, yes lines are set for reliable disconnect and I can transfer calls across network, leave messages and light the msg. light on the sets. I thought I knew the right programing but I guess not. Thanks for the help.

 

[Pepperz]

Try the non-tie line restrictions as well, Ken.

Pepperz at newper dot net

 

[ken1713]

Pepperz and TTT, Thanks, thanks, thanks. It was the non-tie plus the fact that I was only changing the restriction at the remote switch. Dumb Huh? Learning all the time, Thanks again