What is the easiest way to unprogram and remove a PRI. I have a Magix with 2 PRI's the second one that I want to remove is in its own trunk group and is accessed differently than just the normal dial 9. Any help would be greatly appreciated. Thanks in advance!!!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
PRI Question
- Thread starter dontworx
- Start date
- Thread starter
- #2
TouchToneTommy
Vendor
I would have removed the B-channels from their pool before doing that, but glas it worked for you. Go back and see if the pool assignments cleared themselves as well.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question