PRI problems with Analog Station Module

[MasterCommDave]

I have customer on MICS 7.0 that has PRI from Nuvox and they are experiencing some strange problems. We have replaced the ASM but ports 1, 3, and 4 all return to dial tone when trying to dial out, then get reorder from Nuvox. Is it possible that I got faulty ASM? Any help would be appreciated. Thanks

 

[Deweyhumbolt]

Double-check all ports are programmed the same, if so, then that is the most likely issue.

Adversity is Opportunity

 

[SupportDude]

Had a similar problem.
Eventually found that we had to configure the OLI.


-SD-

http://www.mysupportguy.net