PRI outbound issue?

[ScoTTeL]

I have a PRI I turned up today. Inbound works fine, outbound local is fine, long distance no worky! The provider says he is seeing no 1 in the string and my switch must be stripping it. I can't find it! ARS sub patterns are absorbing 00. Where else can I look?


ScoTTeL Office Solutions
PBX, Fiber Optic, Cabling and Networking Installation and Service. See me on Sundance Communications Installers Link Page

 

[Pepperz]

Look in the PRI Options, or just put a 1 in the ARS table.

Pepperz at newper dot net

 

[ScoTTeL]

Can you elaborate a little on that Pepperz?

ScoTTeL Office Solutions
PBX, Fiber Optic, Cabling and Networking Installation and Service. See me on Sundance Communications Installers Link Page

 

[ttech]

the default for the system is to strip the one

Down load this the system planning forms

http://support.avaya.com/elmodocs2/magix_r3/730113_1.pdf

You will see on page 49 that on the special services table Any number that starts with a 1, the 1 gets stripped.

you can do a PRI printout and see it there too

You reprogram the "delete digits" to Zero on special service table entry number 5


Don

 

[Pepperz]

Yep, or add it on the ARS table as Sub A Digits.

Pepperz at newper dot net

 

[merlinman]

As TTECH SAYS:

You should really fix this in the PRI outgoing table.

It is usually Table 5 absorbing a 1.

To change it in ARS will fowl up the other facilities when they are used.

Just make table 5 absorb NOTHING!