PRI on Legend 6.1

[hall5942]

I have a 3part question. Here is a list of cards in my system to reference.

00-6.1 Processor
01-408MLX
02-008MLX
03-016 T/R
04-MLM
05-100 DS1
06-100 DS1
07-100 DS1

The first DS1 is a T1 and the other 2 are PRI. They want to convert the first T1 to a PRI. What will I need to change in programming for this to work?

What protocal should I have telco setup as?

I am used to Nortel and setting up Target lines. What do I need to do to asign the main number to certin phones to ring?

Thanks for your help.

 

[tdaugirdas]

Your inbound PRI routing is probably already set up - you don't have to do that for more than one T1 module. The other two should be programmed for the outbound portions only. If you do a print of PRI information via WinSPM - you should have all the info needed to reprogram the first T1. You should also print out the dialplan info - so you see what trunks are assigned to the other two PRI/T1's - and thus know which ones to assign to the 1st T1

Tom Daugirdas,
President
STCG, Inc.
stcg.com