PRI link

[fimouyas]

hello,
I programmed a PRI connection between two sites, but it does not work despite the LEDs on both cards are green and I occupation, for the touch or I do not know, I even check transmission side and is good.

 

[fimouyas]

hello,
for accuracy both sites option 61C Release 25
thanks.

 

[trvlr1]

What indications do you get that it does not work?
Have you set up routes to send calls across the connection?
If you have a route, have you tried calling the ACOD then a number at the far end to see if that works?

 

[jamie2]

Provide a print out of your RDB, DCH and Trunks.

>LD 21
REQ: prt
TYPE: rdb
CUST 0
ROUT ?

>LD 22
REQ prt
TYPE adan dch ?

>LD 20
REQ: prt
TYPE: tie
TN ? ? ? ?