Simplysmith
IS-IT--Management
Anyone have or had an issue with rebooting a 406 numerious times before the PRI will re-sync?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
PRI Issue with IP406 Rel 1.3.
- Thread starter Simplysmith
- Start date
- Status
crashtest1000
Vendor
We have had a couple sites do this and I have heard that this has occurred with a number of our competitors systems as well.
I don't have an answer to it the only thing we can put it down to is the speed the IPO reboots the exchange fails to sync again. What we do is remove the PRI for 1 minute and this gives the exchange time to time out then plug it in hopefully up she comes.
I don't have an answer to it the only thing we can put it down to is the speed the IPO reboots the exchange fails to sync again. What we do is remove the PRI for 1 minute and this gives the exchange time to time out then plug it in hopefully up she comes.
- Status