Hi all,
We are attempting (don't ask why
to redirect both name and number CLID from an originating caller outbound to a Sangoma unit to convert the PRI to SIP and send out to the PSTN.
The inbound InformationElement=Display in IP Office shows the inbound name CLID, when using DMS100 the IP Office will send outbound name but only the name of the user, not of the original calling party.
Under NI2 the IP Office does not send name at all.
Any idea if it is possible to passthrough the InformationElement=Display on the inbound PRI call to the outbound PRI call? We have attempted using all the different programming switches "Send Original Calling Party" in both the line and under system.
Let me know if anyone has any knowledge or experience in this regard.
Thanks!
C5J
We are attempting (don't ask why
to redirect both name and number CLID from an originating caller outbound to a Sangoma unit to convert the PRI to SIP and send out to the PSTN. The inbound InformationElement=Display in IP Office shows the inbound name CLID, when using DMS100 the IP Office will send outbound name but only the name of the user, not of the original calling party.
Under NI2 the IP Office does not send name at all.
Any idea if it is possible to passthrough the InformationElement=Display on the inbound PRI call to the outbound PRI call? We have attempted using all the different programming switches "Send Original Calling Party" in both the line and under system.
Let me know if anyone has any knowledge or experience in this regard.
Thanks!
C5J
