pri error

[fruni]

hi all,

I am facing with a very critical problem. After every few minutes there is this error message:

PRI241
PRI227

and the D-CHANNEL is released and established.

help needed very urgently

regds,
fruni

 

[fruni]

Hi all,

I looked up for the error message

PRI0227: Protocol Error: Message received in NULL stabe. Output data: DCH:x DATA: y. Where: x=D-channel number y=UTN.
Action: If this message persists contact your tech. support group.

PRI0241: Protocol Error: No response from far end to this PRI call. Output data: DCH:x DATA:y. Where x=d-channel number y=service identifier.
Action: If this message persists contact your tech. support group.

anyone please help me out

regds,
fruni

 

[Reusser]

The other end is not responding to dchannel messages. Talk to your telco provider. this could also happen if you are experiencing slips or bi polar violations. Check lcnt in ld 60. And "PLOG(space)(dchanell number)" in ld 96

 

[fruni]

Hi,
ThanQ for the response. I have checked for LCNT, but there were no slip or loss of frames.

This is the response for PLOG

ld 96
DCH000
plog dch 50

DCH 50 I 0134611F
1C 01 00 0A 02 00 00 00 00 00 00 00 00 00 00 00
00 00

DCH000
plog dch 60
.
DCH 60 I 0134A3AC
1C 01 00 07 01 00 00 00 00 00 00 00 00 00 00 00
00 00

let me know if u need any further information.

regds,
Fruni