Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
PRI error
- Thread starter TIgerV
- Start date
Could be a clocking issue.
TipandRingtoSIP
Technical User
Red alarm means your span is down, the card is not seeing any incoming framing or connectivity from the distant end. Put a loop back plug at your demarc and see if the circuit goes green. If it does go green, then you are good to your dmarc. If it is still red, then you have a problem at your end.. If problem is on your side, then reboot or reset your card... RES-BSSU.
- Status
