pri down?

[stroked5o]

DCH: 9 DISABLED RING (INVALID SKID)
DCH1019 9 0076CF28 00000003

has anybody seen this invalid skid before?

Thanks
mark

 

[PERRYPJ]

never heard of that but the dch1019 is telling you that the dch is down

OLD ROLMEN WORKING ON NORTELS

 

[stroked5o]

we have two loops that are showing this disabled ring and invalid skid and we cannot bring up the dch's. Working with sprint and nextria and we are puzzled?

Thanks

 

[Nortellian]

I know when we have trouble bringing up our d-channels. We end up taking the loop and channels down. Pull the msdl card the d-channel is on. Reseat msdl card and do a force download. enl dch x fdl. This is what we do. I don't know about your situation or your specific error.

 

[luv2ski]

Solution ID: 1.0.1431026.1445471 Product Family: Enterprise Voice Create Date: 01/14/1998

Title:
Trunks controlled by DCH 2 6 and 8 will not stay up

Facts:
Meridian 1

MSDL


Symptoms:
Trunks controlled by DCH 2 6 and 8 will not stay up

DCH 0 and 1 stats " disabled ring invalid skid "


Changes:
Upgraded from 22.16 to 22.46


Cause:
System parameters had not been downloaded


Fix:

Change system parameters in LD97 to FORCE download and initialize system
( FDLC all f l )






Pat Guido
NEXTIRAONE
Pat.guido@nextiraone.com

Formerly Nextira, formerly Williams Communications, formerly Wiltel, formerly Nortel networks, formerly Northern Telecom, formerly, Nynex meridian systems formerly Northern Telecom.

 

[luv2ski]

good luck


Pat Guido
NEXTIRAONE
Pat.guido@nextiraone.com

Formerly Nextira, formerly Williams Communications, formerly Wiltel, formerly Nortel networks, formerly Northern Telecom, formerly, Nynex meridian systems formerly Northern Telecom.

 

[stroked5o]

thanks for the input.

 

[stroked5o]

Will it ini after the command or do I need to be there to hit the magic button?

 

[luv2ski]

i would force it

Pat Guido
NEXTIRAONE
Pat.guido@nextiraone.com

Formerly Nextira, formerly Williams Communications, formerly Wiltel, formerly Nortel networks, formerly Northern Telecom, formerly, Nynex meridian systems formerly Northern Telecom.

 

[luv2ski]

did i make my company look bad

Pat Guido
NEXTIRAONE
Pat.guido@nextiraone.com

Formerly Nextira, formerly Williams Communications, formerly Wiltel, formerly Nortel networks, formerly Northern Telecom, formerly, Nynex meridian systems formerly Northern Telecom.

 

[stroked5o]

look bad...not at all. why would you think that?
Is there a way to force it remotely on a opt 11?

 

[stroked5o]

ini that is....

 

[luv2ski]

i dont think so

Pat Guido
NEXTIRAONE
Pat.guido@nextiraone.com

Formerly Nextira, formerly Williams Communications, formerly Wiltel, formerly Nortel networks, formerly Northern Telecom, formerly, Nynex meridian systems formerly Northern Telecom.

 

[stroked5o]

port 1 and 3 on msdl card which was sprint were down. port to was verison and that was up. took down all dch and disabled the msdl and did a enl msdl x fdl and bam came up and dchannel are clean. Thanks for pointing me in the right direction.