Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PRI configurations

Status
Not open for further replies.

phonedudeSr

IS-IT--Management
Oct 5, 2011
265
US
Do anyone have the steps to add a PRI to CUCM 8.x using MGCP or a document that shows the instructions?
 

Adding a Digital Access PRI Device to an MGCP Gateway

Step 1 To display the Find and List Gateways window, choose Device > Gateway or skip to Step 4 if you have already located the MGCP gateway to which you want to add a port.

Step 2 To locate the MGCP gateway to which you want to add a T1 PRI or E1 PRI port, enter the appropriate search criteria.

Step 3 To display the configuration information for the selected gateway, click the name of the desired gateway in the list.

Step 4 From the Gateway Configuration window, click the endpoint identifier of the T1 PRI or E1 PRI port that you want to configure.

Step 5 Configure the T1 PRI or E1 PRI device protocol settings. See the "Digital Access PRI Port Configuration Settings" section for detailed field descriptions.

Step 6 Click Save.

Step 7 To reset the gateway and apply the changes, click Reset.

HTH,

Han

The great use of life is to spend it for something that outlasts it. ~William James
 
How about adding a PRI to a H323 VGW. I know that there are more steps. Also, can I use on dial-peer for each additional PRI?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top