PRI Cnooection to MD BC12

[jaylek]

I need some help to program the PRI. We have 3 pri connection and the exchange is BC12. The number block which we got is XXXX3100 TO XXXX3599. Can anybody tell me the steps to follow. Also we are planning to put xxxx3535 as the auto attendant number.Which are the commands in order?

 

[HIREI]

Hi,
may be, some tips here:

http://www.tek-tips.com/viewthread.cfm?qid=1181237&page=5

 

[jaylek]

Hi,

Now I got the PRI with 10 blocks(1000 nos.). The new number is 24500000. The PSTN is going to send last 3 digits. I want the pilot number as 24500000. This should land in an auto attendant. 3 operators are there with 105,106 & 107.
How can we program the NUTRI here? Bye the way auto attendant group hunt number is 700.(701,702,703,704)
Also I need to use 24500001 to 24500010 for extensions 101 to 110. How the number traslation table will be? Can anybody give some info?

 

[HIREI]

Also I need to use 24500001 to 24500010 for extensions 101 to 110. How the number traslation table will be? Can anybody give some info?" May be, like this:

nutri:entry=001, cnvtyp=0, numtyp=0, pre=101, trc=4;
nutri:entry=002, cnvtyp=0, numtyp=0, pre=102, trc=4;
.....
nutri:entry=010, cnvtyp=0, numtyp=0, pre=110, trc=4;

 

[whosrdaddy]

hirei, your trc value is wrong, it must be 3

also this can be simplified as :

nutri:entry=0,cnvtyp=0,numtyp=0(or 2),trc=1,pre=1;

cheers,
daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[HIREI]

If incoming numtyp=0, if not, use appropriate or add some - for example 2 and 4. Also, instead of that you can use:

adcoi:abb=001, tra=101, class=0&&3;
and so on.

And, of course, if you use adcoi, numbers 001 - 010 must be ac in nadap (nansi), if nutri (if I'm not wrong) must be ex.

 

[HIREI]

Yes, daddy, you're right, 3, my mistake.

Simplification: I use nutri for my own like this for freedom of manipulation , in our ever changing world in some locations .

 

[jaylek]

Hi,

Thank you all,
If we use this cmd,
Now we are using 0 as operator common number. If we use this commands to translate 001-010 to 101 to 110,then is it possible to use 0 for operator or any other method?,because in nadap we are assiging series.
Bye.

 

[jaylek]

Any help??

 

[cfrei]

PSTN sends last 3 digits, does it means 24500000-24500999?

 

[HIREI]

Hi,
if 0 = NUMTYP OD, then adcoi is of no use.

Try with nutri?

 

[jaylek]

HI HIREI,

PSTN is sending 000 to 999.

 

[cfrei]

Hi,
try this

nutri:entry=0,cnvtyp=0,numtyp=x,trc=1,pre=1,cont=1,rou=x;

leading 0 is replaced with 1

now 0 for operator

nutri:entry=100,cnvtyp=x,numtyp=12,trc=2;

incoming 000 is first translated to 100 and then are
2 digits removed.