PRI CARDS

[travellinglite]

I need to know how to enable and disable a PRI card. Would I use the command enlc an disc plus the TN of the card?

 

[PERRYPJ]

No, go to LD 96 and disable the DCH then go to LD 60 and disable the loop

OLD ROLMEN WORKING ON NORTELS

 

[a12ozbottle]

If you are wanting to reseat or replace the card you may also need to disable the daughter board or tmdi, depends on what you have. If you don't it can cause your system to INI.

 

[tnphoneman]

Don't forget the clock controller if it is an option 11

Signature===========================================
Artificial Intelligence Is No Match for Natural Stupidity.

The latest survey shows that 3 out of 4 people make up 75% of the population.

The original point and click interface was a Smith & Wesson.

Red meat is not bad for you, it is the green fuzzy meat that is bad.

 

[acewarlock]

It might help if you told us what your trying to do and why.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[travellinglite]

I have a PSTN simulator I am trying to use, (

http://www.vconsole.com)to

see how the DNIS is being handled.