Pri card won't enable

[tejas1]

I had a bad NTRB21AA card so changed it with a NTAK09BA card that had a NTAK93AB daughterboard on it. Still cannot enable the loop just get a DTI0210 message. I did the LD96 and DIS DCH 11 and then LD60 and DISL 2. I then removed the bad card and inserted the replacement. The option11c restarted on me. Everything seems to work but the second loop pri still won't let me enable it. Any ideas????..Frank

 

[PERRYPJ]

YOU WILL NEED TO CHANGE THE DCH TYPE

OLD ROLMEN WORKING ON NORTELS

 

[johnpoole]

also check the device number on the card, it can not be in conflict, out the d and rebuild on the new card type

john poole
bellsouth business
columbia,sc