I am connecting a PRI from a Merlin Legend to an Natural Microsystems board (which emulates a Legend) and I would like the display to read 7 digits instead of 4. The PRI is configured as a Merlin PBX. I've tried changing the "number to send" to the "base number and extension" and putting in "555" as the additional 3 digits but this did not work. I'm beginning to think that this only applies when sending out to a carrier. Any thoughts or help would be appreciated. - Bunkman
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
PRI Caller ID Question
- Thread starter bunkman
- Start date
Similar threads
- Locked
- Question
