Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PRI and incoming digits from Telco

Status
Not open for further replies.

pitochueco

Technical User
Aug 8, 2006
16
US
I have an existing site with a PRI. How can I tell how many digits I am recieving from Telco? Also, if they are sending 10 and my extensions are 4 digits, how do I strip the first 6?

Thanks
 
You can't really tell offically from the switch, but if you're extensions are 4 digits, chances are that's what they're sending.

To manipulate what is coming in, use the incoming call tables. On some versions of CM it's on the trunk group form, in newer releases it's now a seperate form.
 
Run a "list trace tac xxx" (xxx being the tac of the trunk group/pri in question) you'll see a "dial" line, that is what they are passing....

thanks,

Wildcard
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top