Preview in Report Form

[FreddyHo]

Hello All,

I'd created a report form and using a relatively small font to print. But when I preview the output at largest, it is still very difficult to see it clearly on screen. Is there any way to change the zoom method to bigger percentage, say 200% or 300%?

Thanks for help in advance!

%-)

 

[craigsboyd]

FreddyHo,

See faq184-2636 for the answer to your question. Slighthaze = NULL

 

[FreddyHo]

Hi, slighthaze

Thanks for your reply! I'd read the FAQ and copied the codes in a new prg and run. Although I re-assure that code stating "Scrollbar = 3", I can't see any scroll bars aside and beneath the window i.e. I am not able to navigator inside the window. Can you please help nad explain?

Thanks again!
%-)

 

[Mike Gagnon]

FreddyHo

What version of VFP are you using? Mike Gagnon

If you want to get the best response to a question, please check out FAQ184-2483 first.

 

[FreddyHo]

Hi, Mike

I'm using VFP6.0.

%-)

 

[Mike Gagnon]

FreddyHo

It seems that the scrollbars in VFP6.0 react differently then the ones in VFP7.0 (and VFp8.0). Or at least its related to the position of the dummy label. I have adjusted the FAQ so it works in VFP6.0. (BTW By default in VFp7.0 the zoom factor opens your report in full zoom, however in VFP6.0 you need to select "zoom" from the toolbar to get the 200% effect).
Thank for pointing out the discrepancy.
Mike Gagnon

If you want to get the best response to a question, please check out FAQ184-2483 first.