Prevent M2250 Operator Calls to Specific Extensions 1

[zzzyzzz]

I am introducing Multi-Tenant operation in a CS1000M and need to restrict incoming PSTN calls for one Tenant group being passed from the Operator's M2250 to the second Tenant group of extensions. Anyone tackled this problem.

 

[johnpoole]

yes, that is done in ld 93.. tenant to trunk group as well as tenant to tenant.. you can block tenant to tenant then build steering codes between them ifyou have to... if it's going to be that much separation, i would use cust instead..

pstn calls can be just ten to trunk group

john poole
bellsouth business
columbia,sc

 

[zzzyzzz]

John

Thanks for that but I understand LD93 is all about outgoing access to trunk/extension groups. What I'm looking to do is prevent an incoming PSTN call to tenant group1 attendant position (already built in CPG) being put through to a Tenant Group2 extension. Tenant Group2 doesn't have/need an Attendant assigned.I thought I might apply a appropriate TGAR / CLS but I haven't anything yet in the NTP's