-
1
- #1
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Prevent/Change calling Party number from being sent out 1
- Thread starter sdappelt
- Start date
acewarlock
Technical User
Could you please post the RDB of the one's your talking about I'm not sure what your asking, could you explain more clearly?
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
You cant stop Calling Party Number from being sent to the CO. The CO owns the network.
You can block Caller ID from being sent to the called party by adding the LD57 FFC CODE "CPP" - make it *67 if you're in the USA
Then dial *67 + outside line access code + phone number
GHTROUT.com | FAQs | Recent Replies
You can block Caller ID from being sent to the called party by adding the LD57 FFC CODE "CPP" - make it *67 if you're in the USA
Then dial *67 + outside line access code + phone number
GHTROUT.com | FAQs | Recent Replies
Ace, imagine just same the post all in case upper, then will it exclaimed perfectly.
Makes sense total.
GHTROUT.com | FAQs | Recent Replies
Makes sense total.
GHTROUT.com | FAQs | Recent Replies
acewarlock
Technical User
Confused much am I?
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
If trying to stop CLID on an single station,change the CLS CPND =Call Party Name Denied.This will resolve on the set level.If you want to change system wide you may have to change on the trunk side,but I beleive more then likely you will have to go to your carrier and request "unavaliable" be displayed
Spunky, rather than CLS CPND - maybe you meant CNID or CLBA (there is no CLS CPND)
In any event - those are good ideas.
GHTROUT.com | FAQs | Recent Replies
In any event - those are good ideas.
GHTROUT.com | FAQs | Recent Replies
1norteltech
Programmer
CLS DDGD blocks name and number on my set. It just says restricted. Again, this is at the set level.
acewarlock
Technical User
sdappelt: How about some responces to our questions.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
- Status
Similar threads
- Locked
- Question
