Prefomance of MD

[fidde]

There are a set of commands in MD LD to check the load ex LDPLP for the load of LPU.

Are there anyone that has a derscription of these and what data that is relevant??

 

[fouesnant]

Hi

This command is not available on the market normally. It is depending of 2 PUs, LMH and LMD.
Extract from Alex :
LMH 170 0AA A command program which handles commands for measurement of the capacity and load in the system. Common
Command group: LD.
[COLOR=red yellow]LMH is a strictly internal test equipment and is only to be used by design and verification departments.[/color]
LMP 171 0AB The regional part of the load measurement function. Initiates and executes the measurement in a LIM and handles the data to LMH. Important
[COLOR=red yellow]LMP is a strictly internal test equipment and is only to be used by design and verification departments.[/color]

How ever, if you have these 2 PU available, I would be really interested to have them :-D

 

[HIREI]

Some times ago, designers called MD110 "small AXE". AXE has plldp command (not "strictly internal") to check processor load, and more statistics means, so what the difference , why not in MD? Rhetorical question ?

May be, because such statistics are the additional load on LPU, which is not so powerful.