Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Preferred Forms

Status
Not open for further replies.

Schteven

Technical User
Joined
Dec 29, 2001
Messages
2
Location
US
Am using Paradox 10 which was upgraded from Paradox 5. In 5 you were able to select a table and specify a "preferred" form so that when you press F7 it would always display the form I designed for use with the table. In 10 if I am viewing a table and press F7 it displays a new form, not the form I designed.
I can get around this by going to Project Manager, selecting my form, then pressing F7 to toggle back and forth between my form and my table. But if I go to my table first and use F7, as I said it displays a new form rather than the form I set up for the table.
Does Paradox 10 have a method for setting a "preferred form" as did Paradox 5?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top