PPPoE and PPTP on a PIX 501

[abromfield]

Hello,

Can someone please help me with my PIX 501 configuration? I have a PIX 501 that establishes a Internet connection to my ISP via PPPoE. Therefore my outside IP address is very dynamic. I want to allow PPTP packets to pass through to my Windows 2003 VPN server 172.16.2.20. I'm using version 6.3 and the Fixup protocol pptp 1723 is enabled. Any suggestions would be greatly appreciated.

Thanks,

Andrew

 

[ChicagoTechNet]

I thought I had answered this already. quoted from

http://www.chicagotech.net/

What statements are required to allow a VPN inbound past my Cisco PIX?

The following example is a simple PPTP access list:

access-list 110 permit tcp any host x.x.x.x eq 1723
access-list 110 permit gre any host x.x.x.x

Note: 1. x.x.x.x is outside ip. 2. If you use 6.3.1, you will need to enable fixup protocol pptp 1723.


Robert Lin, MS-MVP, MCSE & CNE
Windows, Network, Internet, VPN, Routing and How to at

http://www.ChicagoTech.net