I am using a Cisco AS5300 with multiple PRI's @ my central site. This router is connected to Dialup users utilizing Async-group profile, one remote site using a ISDN router (Netopia), and multiple ISDN modems.
So far everyone is connecting successfully, but the ISDN router (Netopia) can't bring up the second BRI. I have stipulated on my Dialer profile to support PPP multilink, which appears to be working, because the ISDN modems seem to bundle (bring up two channels) but the router does not.
Here is a sample of my Interface Dialer:interface Dialer1
ip unnumbered Loopback0
no ip directed-broadcast
encapsulation ppp
dialer in-band
dialer idle-timeout 12000
dialer-group 1
no peer default ip address
no fair-queue
ppp authentication ms-chap chap
ppp multilink
ppp timeout multilink link add 15
So far everyone is connecting successfully, but the ISDN router (Netopia) can't bring up the second BRI. I have stipulated on my Dialer profile to support PPP multilink, which appears to be working, because the ISDN modems seem to bundle (bring up two channels) but the router does not.
Here is a sample of my Interface Dialer:interface Dialer1
ip unnumbered Loopback0
no ip directed-broadcast
encapsulation ppp
dialer in-band
dialer idle-timeout 12000
dialer-group 1
no peer default ip address
no fair-queue
ppp authentication ms-chap chap
ppp multilink
ppp timeout multilink link add 15