aixperts,
I am trying to setup a PPP cnxn (dial-up), from MS Vista to my AIX 5.3 server. The thing is - I can communicate with my modem but suddenly dropped for unknown reason. Any tips where I can check for possible error? Using "smit ppp", here's my (/dev/tty0) configuration/setup:
A.) LINK CONTROL CONFIGURATION
PPP subsystem name [test]
max server connections [2] #
max client connections [2]
max demand connections [2]
max ip interfaces [2] #
Maximum IPv6 Interfaces [2]
Maximum IP & IPv6 Interfaces [2]
max async hdlc attachments [2] #
mru [] #
async character map [] X
transmit async character map [] X
negotiate MRU yes +
negotiate magic number yes
negotiate async map yes
negotiate protocol compression yes
negotiate address control compression yes +
force authentication no
chap interval []
Enable PPP compression no
max attachments for multilink []
MRRU []
PPP subsystem telephone number [] #
Enable PPP SNMP subagent no
B.) PPP IP INTERFACE
Local IP address [192.168.0.122]
Starting Remote IP address [192.168.202.1]
Netmask [255.255.255.0]
C.) PAP
User name [master]
Remote host name [*]
Password [master]
I am trying to setup a PPP cnxn (dial-up), from MS Vista to my AIX 5.3 server. The thing is - I can communicate with my modem but suddenly dropped for unknown reason. Any tips where I can check for possible error? Using "smit ppp", here's my (/dev/tty0) configuration/setup:
A.) LINK CONTROL CONFIGURATION
PPP subsystem name [test]
max server connections [2] #
max client connections [2]
max demand connections [2]
max ip interfaces [2] #
Maximum IPv6 Interfaces [2]
Maximum IP & IPv6 Interfaces [2]
max async hdlc attachments [2] #
mru [] #
async character map [] X
transmit async character map [] X
negotiate MRU yes +
negotiate magic number yes
negotiate async map yes
negotiate protocol compression yes
negotiate address control compression yes +
force authentication no
chap interval []
Enable PPP compression no
max attachments for multilink []
MRRU []
PPP subsystem telephone number [] #
Enable PPP SNMP subagent no
B.) PPP IP INTERFACE
Local IP address [192.168.0.122]
Starting Remote IP address [192.168.202.1]
Netmask [255.255.255.0]
C.) PAP
User name [master]
Remote host name [*]
Password [master]