PP8600 Error Msg after upgarding to 3.7.7

[HelpTheWestie]

Hello

Passport 8610 3.3.4 to 3.7.7

I have just upgraded my passport 8610 to software version 3.7.7 from 3.3.4

I now get the following error msg when saving and exiting through Device Manager V5.8.5.0

rcSysAction.0: notWritable

Does anyone know what the above error msg means?

I followed the upgrade note from Nortel to the letter...

 

[JeroeNortel]

Hi there,

I've had the same message when we upgraded our PP8600 from 3.5.3 to 3.7.5 a while ago. I haven't been able to find the exact cause but I presumed it had something to do with the amount of memory 3.7.x needs in comparison to 'older' releases. We used the 8191 (128MB) for this upgrade, it is advisible to have the 8192 (256MB) installed from release 3.7.x because of the ammount of memory being used.

Again I'm not really sure but check your memory usages, it could be a cause.

Regards

 

[HelpTheWestie]

Hi JeroeNortel

Before upgrading to version 3.7 we installed 256MB into all are Switch Fabrics, as advise in the Nortel Docs.

Regards

 

[HelpTheWestie]

All

I have answer my own question

rcSysAction.0: nonWritable

Is down to running the wrong version of Device Manager...

I was running version 5.8.5.0 - Passport 9600 version 3.7 need device Manager 5.8.8.0

Ta All

 

[HelpTheWestie]

All

I have answer my own question

rcSysAction.0: nonWritable

Is down to running the wrong version of Device Manager...

I was running version 5.8.5.0 - Passport 8600 version 3.7.7 need device Manager 5.8.8.0

Ta All