the powervault 220s just recognize the half range of disk, the other range of disk are disable, this powervault is connected to a perc 4e/dc in the channel B, in the channel A is pluged with a powervault 221s, the chanel B is plugged in the EMM primary chanel of the powervault 220s, what can i do to recognize all the range of disk, the switch of the control mode is in joined, so i supposed that i can use all the scsi disks, any sugestion or a diagram, thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
powervault 220s with perc 4e/DC on poweredge 830
- Thread starter felixcain
- Start date