PowerVault 200s on HP server

[Guest_imported]

I have a powervault 200s that I would like to attach to an HP 900 G70 box. The box has an LVD controller card. How do I configure the 200s ? do I need a terminator card ?
PS. configuration for single system or split bus.

 

[mholland88]

In theory it will work, if your SCSI card can see the drives then normally you are fine. For the termination, the cards at the ends of the PV handle that. For the splitting options, it depends on what type of cards in the PV you have, if they are ESM or SMM, they can either be split bus or single backplane, but only on the same system. If you have a ESEM, SEMM card you can set up a cluster between the two systems, or use it on one system same as the ESM and SMM cards. The card are stamped what type they are. Docs about the 200s

http://docs.us.dell.com/docs/stor-sys/hendrx12/english/index.htm