Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Powerpath HBA

Status
Not open for further replies.
foc

foc

MIS
Apr 7, 2005
21
0
0
US
Running on a windows 2k3 server. I have sansurfer running and it sees and can configure the HBAs, but Powerpath, does not seem to see them.

I know it a poor description of the issue, but running into a meeting..


Thanks for any help in advance
 
Sort by date Sort by votes
what driver are you using? go to the Qlogic website, go to the EMC partner link, download the latest approved Storport driver and the latest firmware bundle for your HBA. Unistall Powerpath and reboot, install the driver reboot then install powerpath again. check at the switch that it can be seen, if it can zone it in to the Storage processors then rescan or reboot the host.
 
Upvote 0 Downvote
Thanks for the post ...

Some one went in after me and changed the fabric ...

"There are no facts, only interpretations."
-Friedrich Nietzsche
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

peschool
  • Locked
  • Question
DS3200 SAS server and HBA
Replies
0
Views
67
peschool
peschool
nitelife
  • Locked
  • Question
SATA idle spin down with LSI HBA
Replies
0
Views
102
nitelife
nitelife
reneford
  • Locked
  • Question
PowerPath in HACMP environment
Replies
0
Views
21
reneford
reneford
reneford
  • Locked
  • Question
PowerPath in HACMP environment
Replies
0
Views
22
reneford
reneford
mokkan
  • Locked
  • Question
LP9002L-E LighPulse 64bit PCI 2GB HBA Adapter question
Replies
1
Views
34
kewitz
kewitz

Part and Inventory Search

Sponsor

Back
Top