Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Powering Down the G430 Server

Status
Not open for further replies.

Luther Johnson

Systems Engineer
Aug 11, 2022
5
US
We have an office that will be replacing its UPS System and had asked me to powerdown the G430. What is the best way to power it down? And also bring it back up In addition to check to see if the status says if it is down...and if it is up?

thank you in advance
 
Is there an 8300 in the gateway? There are a couple ways to shut the 8300 down - Log into the web page and shut it down or someone could also press the shutdown button on the 8300 board and wait for the light to go solid.

If no 8300 then just pull power.
 
What is your CM software release and version?

g430 is a media-gateway

For status - CM SAT
Command: prompt, use list media-gateway to see registered media-gateways.

use list configuration media-gateway to see media-modules including s8300 server module and phone media-modules
use list survivable-processor to see LSP and ESS survivable servers.


A great teacher does not provide answers, but methods to teach others "How and where to find the answers"

bsh

49 years Bell, AT&T, Lucent, Avaya
Tier 3 for 39 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top