Has anybody come accross the power LED on DSM32+ cards going to steady red after a reboot? Had it happen twice in the last two weeks. Module works fine as do the sets connected to them but the power LED stays red. Can't find anything in any Nortel document or on their website.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Power LED on MBM
- Thread starter telcodog
- Start date
Is this a BCM 50 Rel. 5 ? I have put in 2 or 3 of these in the last month or so & had the exact same problem. At one of the sites I happened to have a spare 32 card & when I changed the card I got 2 green leds.Popped the old card back in & red power led would not go out even though the card functioned properly.I just left all three sites with the red led & have not heard back from customers saying that they are experiencing any trouble. All 3 sites are fully patched.
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question